ZyXEL Communications 2WG - Manual (Page 157)

ZyWALL 2WG Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
157
1. on your PC, clicking Start->Programmer->Check Point SmartConsole R60 -> SmartDashboard
2. Enter your user name and password, then press OK button to use your Check Point.
3. On Network Objects, you must see a default check point object here. For this example, my default
check point object is twsrv12191, double click the object to check its settings.
4. Before you did the settings, you should make sure that your object is a Check Point Gateway.( not a
Check Point Host )
5. If your check point object is a Check Point Host, select your object and click the right button on your
mouse, then choose Convert To Gateway to change its settings.