ZyXEL Communications 2WG - Manual (Page 25)

ZyWALL 2WG Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
25
Following picture is an example while PPPoE is selected.
Once the required information is correctly configured, click on the “Finish” button to apply the setting
and then you have finished configuring Internet Access on WAN link.
DHCP server/client/relay
ZyWALL supports
(1) DHCP client on the WAN port
User can choose either a static IP or a dynamic IP address for WAN port. When choosing dynamic IP,
ZyWALL will get a DHCP IP address from ISP or upper layer DHCP server.
(2) DHCP server/relay/none on the LAN ports
ZyWALL supports DHCP server for LAN ports, but also
1. When choosing DHCP setting as ‘None’, the LAN will NOT assign IP address to the
associated hosts. Client PCs need to configure IP address manually.