ZyXEL Communications 2WG - Manual (Page 220)

ZyWALL 2WG Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
220
Step 4. On the device, go to ADVANCED->REMOTE MGMT->CNM, enable Vantage CNM and
configure Vantage CNM Server Address in the filed. If Encryption Algorithm is enabled, you must select
the same algorithm and secret key on both device and Vantage CNM. In the following case, the
Encryption Algorithm is disabled.
Step 5. After configuring CNM remote management on device, ZyWALL will start to register itself to
configured Vantage CNM server. After exchanging the configuration between ZyWALL and Vantage
CNM, the Registration Status will change to “Registered”. At this moment, the configuration is
synchronized on both device and Vantage CNM.