ZyXEL Communications 2WG User Manual
Page 219
ZyWALL 2WG Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
219
1. device type
2. device name
3. device's LAN MAC address
The XML file can be used for mass deployment.
User can assign a device owner or leave it to the owner of folder AAA.
Step 3. Input the MAC address of LAN interface of the device. Give this device a name. Select the
corresponding Device Type, press Finish.
Note that if the ZyWALL has been deployed (configured) and you want to retrieve the configuration from
device. You can select the option “Get configuration from the device”. Otherwise, you can use “Set
Vantage CNM configuration to device” to overwrite existing configuration on device as soon as it
registers to Vantage CNM.
After finishing the configuration on Vantage CNM, click on “Finish” to finish the registration of device
on CNM and following screen will show up and ZyWALL is added to CNM under folder AAA.