Zanussi ZCE7550-ZCE7551 - Manual (Page 11)

11
A) To set the timer to switch
on and off automatically
i) Ensure the electricity supply is switched
ON and that the correct time of day is
displayed, e.g. 9.am. as Fig. 6.
ii) Place food in the oven.
iii) To set the length of cooking time, press
the Selector Control button ( ) until
the 'Cook Time' indicator neon ( ) is
illuminated. Press the increase control
( + ) until the required length of cooking
time is displayed, e.g. 2 hrs 15 mins as
Fig. 7. If necessary depress the
decrease control ( - ) until the correct
time interval is achieved.
The maximum cooking time is 10 hours.
iv) Release the buttons. The 'Cook Time'
indicator neon ( ) will be illuminated.
Remember, this must be completed
within 5 seconds of first pressing the
Selector Control button.
v) To set the 'End Time'. Press the
Selector Control button until the 'End
Time' indicator neon ( ) flashes.
Press the increase control ( + ) until the
required stop time is displayed, e.g.
12.15 p.m. as Fig. 8. If necessary press
the decrease control ( - ) until the correct
time interval is achieved.
vi) Release the buttons. The time of day
will be displayed after 5 seconds. The
'Cook Time ( ) and 'End Time' ( )
indicator neons will be illuminated.
The 'End Time' must not be more than
23 hours 59 minutes from the time of
day. For example, if the time of day is
09.00a.m., the latest 'End Time' would
be 08.59a.m. the next day.
vii) Set the main oven control to the required
temperature. The oven indicator neon
should be OFF.
NOTE: When the automatic timed period
starts, the oven indicator neon will glow.
It may turn on and off during use to show
that the setting is being maintained.
Fig.6.
Fig.7.
Fig.8.