Zanussi ZCE7550-ZCE7551 - Manual (Page 23)

23
To fit the main oven shelves
The shelves should be fitted with the straight
rods uppermost on the frame and the forms
towards the back of the oven. If not fitted
correctly the anti-tilt and safety stop
mechanism will be affected.
Hints and tips
• Arrange the shelves in the required
positions before switching the oven on.
Shelf positions are numbered from the
bottom upwards.
• When cooking more than one dish in the
oven, place dishes centrally on different
shelves rather than cluster several
dishes on one shelf, this will allow the
heat to circulate freely for the best
cooking results.
• When batch baking one type of food,
e.g. Victoria sandwich cakes, those of
similar size will be cooked in the same
time.
• It is recommended that when baking
larger quantities the shelf positions
should be evenly spaced to suit the load
being cooked. A slight increase in
cooking time may be necessary.
• Do not place baking trays directly on the
oven base as it interferes with the oven
air circulation and can lead to base
burning; use the lower shelf position.
Do not place cookware and cooking
pots with rough bases e.g. cast iron
on the oven door as damage to the
glass may occur.