Zanussi ZHC 95 ALU - Manual (Page 10)

INSTALLATION INSTRUCTIONS
10
It is dangerous to alter the specifications or attempt to modify this product in any way.
Technical Information
DIMENSIONS Height (CANOPY) 100 mm
Height (CHIMNEY) 450-850 mm
Width (CANOPY) 898 mm
Width (CHIMNEY) 200 - 270 mm
Depth 507 mm
Gross weight 24,5 kg
Net weight 20 kg
DUCTING OUTLET DIAMETER Ø120 mm
ELECTRICAL SUPPLY: 220-240V (50Hz)
POWER CONSUMPTION: 180 W
FAN MOTOR: 140 W
LAMP: (2x40W halogen spotlights) 40 W
SUITABLE FOR
INSTALLATION ABOVE:
Electric Slot-In Cooker: 13,5 KW
Gas Slot-In Cooker: 12,4 KW
Electric Hob: 7 KW
Gas Hob: 10 KW
NOTE: CE marking certifies that this appliance complies with the requirements laid
down in the EEC directive 89:336 (Electromagnetic Compatibility) and subsequent
modifications; EEC directive 73/23 (Low Voltage) and any subsequent modifications.
ELECTRICAL CONNECTION
This appliance must be earthed.
Electrical Requirements
Any permanent electrical installation must comply with
the latest I.E.E. Regulations and local Electricity Board
Regulations. For your own safety this should be
undertaken by a qualified electrician e.g. your local
Electricity Board, or a contractor who is registered
with the National Inspection Council for Electrical
Installation Contracting (NICEIC).
Electrical Connection
Before connecting to the mains supply ensure that
the mains voltage corresponds to the voltage on the
rating plate inside the cooker hood.
This appliance is fitted with a 3 core mains cable and
must be permanently connected to the electricity
supply via a double-pole switch having 3mm minimum
contact gap on each pole. A Switched Fuse
Connection Unit to BS1363 Part 4, fitted with a 3 Amp
fuse, is a recommendad mains supply connection
accessory to ensure compliance with the Safety
Requirements applicable to fixed wiring instructions.
This appliance conforms to BS 800: 1988 and
EEC Directive No. 78 308 regarding suppression of
radio and television interference.