Yamaha VMX17Y(C) - Manual (Page 21)

INSTRUMENT AND CONTROL FUNCTIONS
4-5
2
3
4
5
6
7
8
9
EAU46592
Multi-function display
WARNING
EWA12312
Be sure to stop the vehicle before
making any setting changes to the
multi-function display. Changing
settings while riding can distract the
operator and increase the risk of an
accident.
A “SELECT” button and a “RESET”
button are located on the handlebar
holder. These buttons allow you to con-
trol or change the settings in the
multi-function display.
The multi-function display is set to the
Normal mode every time the key is
turned to “ON”.
Normal mode
The following functions are available in
the Normal mode:
● an odometer (which shows the to-
tal distance traveled)
● a clock
● two tripmeters (which show the
distance traveled since they were
last set to zero)
● a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning indicator
started flashing)
● a fuel meter
● a transmission gear indicator
● a coolant temperature display
● a self-diagnosis device
TIP
The speedometer and odometer/trip-
meter displays can be switched be-
tween miles and kilometers. To switch
the speedometer and odometer/tripme-
ter displays, press “SELECT” for at
least two seconds.
1. Multi-function display
1
1. “SELECT” button
2. “RESET” button
1 2
1. Odometer
2. Clock
3. Trip/Fuel
4. Fuel meter
5. Transmission gear display
6. Coolant temperature display
1 2 3
4 5 6