Yamaha VMX17Y(C) - Manual (Page 46)

FOR YOUR SAFETY – PRE-OPERATION CHECKS
5-2
1
2
3
4
5
6
7
8
9
Rear brake
● Check operation.
● If soft or spongy, have Yamaha dealer bleed hydraulic system.
● Check brake pads for wear.
● Replace if necessary.
● Check fluid level in reservoir.
● If necessary, add recommended brake fluid to specified level.
● Check hydraulic system for leakage.
7-25, 7-26
Clutch
● Check operation.
● If soft or spongy, have Yamaha dealer bleed hydraulic system.
● Check hydraulic system for leakage.
7-24
Throttle grip
● Make sure that operation is smooth.
● Check cable free play.
● If necessary, have Yamaha dealer adjust cable free play and lubricate cable
and grip housing.
7-21, 7-28
Control cables
● Make sure that operation is smooth.
● Lubricate if necessary.
7-27
Wheels and tires
● Check for damage.
● Check tire condition and tread depth.
● Check air pressure.
● Correct if necessary.
7-21, 7-24
Brake and shift pedals
● Make sure that operation is smooth.
● Lubricate pedal pivoting points if necessary.
7-29, 7-29
Brake and clutch levers
● Make sure that operation is smooth.
● Lubricate lever pivoting points if necessary.
7-28
Sidestand
● Make sure that operation is smooth.
● Lubricate pivot if necessary.
7-29
Chassis fasteners
● Make sure that all nuts, bolts and screws are properly tightened.
● Tighten if necessary.
—
Instruments, lights, signals
and switches ● Check operation.
● Correct if necessary.
—
ITEM CHECKS PAGE