Xerox 4.2 - Manual (Page 28)

Bates Print Caveats
Bates Print is not integrated with DocuSP. This creates
the following conditions:
♦ Bates Print must be manually started.
♦ Bates Print must be manually brought to front of the
display.
♦ Bates Print fault and status messages do not
appear on DocuSP.
♦ The layout feature should not be used with Bates
Print.
♦ If the size of the image is different from the size of
the paper, the image may be positioned differently
in Bates jobs than for Copy jobs. Images on Bates
jobs are typically centered on the page.
♦ Some unusual staple modes do not work correctly
when using Short Edge Feed scanner input and
Long Edge Feed tray stock:
o Single Portrait Left
o Single Portrait Right
o Dual Landscape Top
o Dual Landscape Bottom
The workaround is to always load originals Long
Edge Feed whenever possible; barring that, these
staple modes requires originals to be loaded 180
degrees rotated.
♦ Bates install does not automatically eject the CD;
you need to eject the CD via the System menu.
♦ If the machine is in High Security mode, you need
to restart the machine instead of simply restarting
Workspace Menu after the Bates install.
♦ Bates Print is not compatible with the Disk
Overwrite feature.
♦ On copy jobs, Bates changes some media types.
Full Cut Tabs, Labels, and Ordered Stock all map
to Ordered Stock.
24 DocuSP 3.8 and 4.0 to 4.1 Differences Document