Xerox 4.2 - Manual (Page 29)

New Features And Updates For EPS Products Only
LCDS Tape Client updates
DocuSP 4.2 enables users to select and print single or
multiple LCDS reports from the DocuSP Tape Client
GUI. If multiple reports are desired, the reports must be
specified in ascending order with a position relative to
the beginning of the container.
The user can specify a range of reports from a file for
printing. The report range applies to the first file in the
file range only, and uses the same format as the file
range. The maximum length for the report range is set
to 120 characters.
The Tape Client GUI is modified to support Reporting.
The File Ranges panel is renamed to Tape File
Selections. Within this panel, a new radio button for
Reports and a text field for Report Ranges are added.
GUI behaviors
♦ Selecting All: the Tape Client GUI prints all files on
the tape as in DocuSP 4.1.
♦ Selecting Range: the Tape Client GUI prints a
range of files on the tape as in DocuSP 4.1.
♦ Selecting Reports: The Tape Client GUI prints
reports from the first file specified in the Files text
field. If there is more than one entry in the Range
field, the subsequent entries are ignored.
LCDS Accounting page update
DocuSP 4.2 introduces an update to the LCDS
accounting page. Prior to 4.2, only the initial JDL/JDE
was printed on the LCDS accounting page and saved
in the DocuSP accounting log. In 4.2, the Initial
JDL/JDE remains the same; however, the Current (or
Last) JDL/JDE is also printed on the LCDS accounting
page and saved in the DocuSP accounting log.
DocuSP 4.1 to 4.2 Differences Document 25