Xerox 4.2 - Manual (Page 5)

DocuSP 4.2 Overview
This document highlights the changes and new features
between the DocuSP 4.1 and DocuSP 4.2 software
releases.
Many changes have been made to accommodate Xerox
customers who have specific needs.
The first section of this document provides a list of features
that are new for all products. The following sections
indicate features that are new to specific product families
only.
New Features And Updates For All Products
General Feature Enhancements
DVD Installation
DocuSP 4.2 introduces the ability to install DocuSP
software from DVD. Previously, DocuSP required CD-
ROM media for installation. CD-ROM media continues
to be supported for installations; specifically those
systems that do not include a DVD-ROM drive.
However, by using DVD media instead of CD media,
the CSE performs fewer manual steps at install time,
and saves, at minimum, the time required to swap
CDs.
NOTE: As mentioned above, DVD install media are
only available for systems that contain a DVD-ROM
drive. In addition, the DocuSP Color Supplemental
Software is not yet available on DVD. Currently, the
Nuvera, HighLight Color, and iGen3 systems contain a
DVD-ROM drive.
PPML Update
DocuSP can now accept PPML zipped jobs with a
Xerox XPIF ticket attached.
DocuSP 4.1 to 4.2 Differences Document 1