Xerox 4.2 - Manual (Page 6)

Backup/Restore Operability Updates
The Backup and Restore GUI’s operability has been
improved in DocuSP 4.2.
Previously, Configuration Backup and Restore did not
allow backup and restore of DocuSP license data and
was not accessible on an unlicensed system. Under
DocuSP 4.2, Configuration Backup and Restore
provides the following improvements:
♦ Previously used settings in the Configuration
Backup window are saved across DocuSP restarts
and instances when the window is closed and
reopened. These settings include the selected
files/directories for backup, the destination
directory, and the state of the estimate size
option.
♦ Unless overridden by the saved settings, the
default directory destination for backup is
/var/spool/XRXnps/backup. If this directory is not
present on the system, the default is the root
directory.
♦ The default source directory for restore is
/var/spool/XRXnps/backup. If this directory is not
present on the system, the default is the root
directory.
♦ Unless overridden by the saved settings, the
default state of the Estimate Size option is
selected.
♦ The ability to backup/restore DocuSP license data
is provided.
♦ The ability to perform Configuration Restore on
an unlicensed system is allowed, which results in
the system being licensed as well as the other data
being restored.
NOTE: This capability is not available on Nuvera
systems.
2 DocuSP 3.8 and 4.0 to 4.1 Differences Document