Zenith P60W26 - Manual (Page 31)

31
Safety instructions
Monitor Overview
Basic operation
Sleep timer
Picture & Sound
Special features
Others
Connections
Using the remote control
Installing batteries
• Open the battery compartment cover on the back
of the remote control and insert the batteries with
correct polarity, match “+” with “+”, and match “-”
with “-”.
• Install two 1.5V “AA” alkaline batteries.
Don’t mix used batteries with new batteries.
Notes for using the remote control
Make sure these are no
objects between the
remote control and its
sensor. Don’t place the remote control
near a heater or damp place.
Strong impact on the remote con-
trol may cause operation failure. Signal from the remote control
may be disturbed by sun light or
other strong light. In this case,
turn the set to other direction.