Zenith P60W26 - Manual (Page 32)

32
Turning on the Monitor
3
2
1
2
1
- When using the remote control, aim it at its sensor on the Monitor.
Turning on the Monitor just after installation
Turning on the Monitor (power cord is still connected)
Connect power cord correctly.
Press the main ON/OFF button on the Monitor. At this moment, the Monitor is
switched to standby mode. Press the
or INPUT SELECT button on the
Monitor or press the power on or video/pc button on the remote control and
then the Monitor will be turned on.
Press the or INPUT SELECT button on the Monitor or press the power on
or video/pc button on the remote control and then the Monitor will be turned
on.
If the Monitor is turned off with the button on the Monitor
• Press the main ON/OFF button on the Monitor to turn on the Monitor.
If the Monitor is turned off with the ON/OFF button on the Monitor
• Press the main ON/OFF button on the Monitor and then press the or
INPUT SELECT button on the Monitor or press the power on or video/pc
button on the remote control and then the Monitor will be turned on.
If the Monitor is turned off with the remote control and also the ON/OFF
button on the Monitor
Tips
• Adjusting volume level
The volume( G G ) button increases the sound and the volume( F F ) button reduces
the level of sound.