Yamaha R-302 - Manual (Page 12)

12
1
Set to the “
∞
” position.
2
Turn the power on.
3
Select the desired input source by using the input
selector buttons.
* The name of the selected input source will appear on the
display.
* Note that pressing on each input selector button selects the
source which is connected to the corresponding input
terminals on the rear panel.
4
Select the speakers to be used.
* If you use two speaker systems, press both the A and
B switches.
5
Play the source. (For detailed information on the
tuning operation, refer to page 15.)
6
Adjust to the desired output level.
7
If desired, adjust the BASS, TREBLE, BALANCE and
LOUDNESS controls, etc. (refer to page 14).
Notes
● Whenever the TAPE MONITOR is pressed, the tape deck
is selected or canceled alternately.
● If both TAPE MONITOR and another input selector button
are selected, TAPE MONITOR takes priority of another
input selector button.
To turn off the power
Press the POWER switch again.
BASIC OPERATIONS
TO PLAY A SOURCE
SPEAKERS
A
ON
OFF
B
ON
OFF
TAPE
MONITOR AUX PHONO
TUNER CD
3 1, 6 2
4 7
2 1 A/B/C/D/E 3 4
6 5 7 8
TAPE MONITOR AUX PHONO
TUNER CD
POWER
TUNING MODE
AUTO/MAN'L MONO
FM/AM TUNING EDIT MEMORY
MAN'L/AUTO FM
DOWN UP
SPEAKERS PHONES A ON
OFF
B ON
OFF
VOLUME
BASS
5 5 4
3
2
l 0 l
2
3
4
TREBLE
5 5 4
3
2
l 0 l
2
3
4
BALANCE
5 5 4
3
2
l 0 l
2
3
4 L R
LOUDNESS
5 7 6
4
3
2
l FLAT
I0
9
8
l6 l8 20 24
28
34
40
50
60
70
l4 l2 l0
8
6
4
3
2
l 0 –dB
PRESET STATIONS
-30dB
POWER