Yamaha R-302 - Manual (Page 17)

17
English
To store stations
2 1 A/B/C/D/E 3 4
6 5 7 8
TAPE MONITOR AUX PHONO
TUNER CD
POWER
TUNING MODE
AUTO/MAN'L MONO
FM/AM TUNING EDIT MEMORY
MAN'L/AUTO FM
DOWN UP
SPEAKERS PHONES A ON
OFF
B ON
OFF
VOLUME
BASS
5 5
4
3
2 l 0 l 2
3
4
TREBLE
5 5
4
3
2 l 0 l 2
3
4
BALANCE
5 5
4
3
2 l 0 l 2
3
4
L R
LOUDNESS
5 7 6
4
3
2 l FLAT
I0
9
8
l6 l8 20 24
28
34
40
50
60
70
l4 l2 l0 8
6
4
3
2
l 0 –dB
PRESET STATIONS
-30dB
1 2
AUTOMATIC PRESET TUNING
You can also make use of an automatic preset tuning function for FM stations only. By this function, this unit performs automatic
tuning and stores FM stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the
manual preset tuning method on page 16.
1
2
After 5 seconds, the automatic preset tuning begins from A1.
Received stations are programmed to A1, A2 ... A8
sequentially.
* If more than 8 stations are received, they are also
programmed to the preset station numbers on other groups
(B, C, D and E) in that order.
If you want to store the first station received by the
automatic preset tuning to a desired preset station
number.
If, for example, you want to store the first received station to
C5, select “C5” by using the A/B/C/D/E button and the
PRESET STATIONS buttons after pressing the MEMORY
button in step 2 before the automatic preset tuning begins. The
first received station is stored to C5, and next stations to C6,
C7 ... sequentially.
If stations are stored up to E8, the automatic preset tuning is
finished automatically.
When the automatic preset tuning is finished
The display shows the frequency of the last preset station.
Check the contents and the number of preset stations by
following the procedure of the section “To recall a preset
station” on page 16.
To recall a preset station
Simply follow the procedure of the section “To recall a preset
station” on page 16.
Notes
● If no station is received by the automatic preset tuning
search, the search finishes after “NOTHING” flashes for
about 3 seconds on the display.
● You can replace a preset station by another FM or AM
station manually by simply following the procedure of the
section “To store stations” on page 16.
● If the number of received stations is not enough to be stored
up to E8, the search will be finished automatically when it
reaches the highest frequency after searching through all
frequencies.
● With this function, only FM stations with sufficient signal
strength are stored automatically. If the station you want to
program is weak in signal strength, tune to it in monaural
manually and program it by following the procedure of the
section “To store stations” on page 16.
Press and hold for
about 3 seconds.
FM/AM
FM
MEMORY
MAN'L/AUTO FM
MEMORY AUTO TUNING
Flashes.