Yamaha R-302 - Manual (Page 7)

7
English
B
Tone controls
BASS
Used to increase or decrease the low frequency response.
The 0 position produces flat response.
TREBLE
Used to increase or decrease the high frequency response.
The 0 position produces flat response.
C
BALANCE control
Adjusts the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused by
speaker location or listening room conditions.
D
A/B/C/D/E button
Press this button to select a desired group (A–E) of preset
stations.
E
PRESET STATIONS buttons
Used to enter as many as 40 station frequencies into the
memory.
F
Continuously variable LOUDNESS control
Used to compensate for the human ears’ loss of sensitivity to
high and low-frequency ranges at low volume.
G
VOLUME control
Used to raise or lower the volume level.
1 3 2
4 5 6 7
DISPLAY PANEL
1
Multi-information display
Displays various information, for example station frequency,
preset station number and name of selected program source.
2
STEREO indicator
Lights up when an FM stereo broadcast with sufficient signal
strength is received.
3
Signal-level meter
Indicates the signal level of the received station.
If multipath interfernce is detected, the indication decreases.
4
MEMORY indicator
When the MEMORY button is pressed, this indicator flashes for
about 5 seconds. During this period, the displayed station can
be programmed to the memory by using the A/B/C/D/E button
and one of the PRESET STATIONS buttons.
5
TAPE MONITOR indicator
Lights up when the tape deck is selected as the input source
by pressing the TAPE MONITOR button.
6
AUTO TUNING indicator
This indicator lights up when this unit is in the automatic tuning
mode.
7
SLEEP indicator
Lights up while the built-in SLEEP timer is functioning.
AUTO TUNING
PRESET
STEREO
0
MHz
40 60 20 l00
MEMORY SLEEP TAPE MONITOR
FM