Yamaha R-302 - Manual (Page 9)

9
English
CONNECTIONS
Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other
components to which connections are being made.
CONNECTIONS WITH OTHER COMPONENTS
When making connections between this unit and other components, be sure all connections are made correctly, that is to say L (left)
to L, R (right) to R, “+” to “+” and “–” to “–”. Also, refer to the owner’s manual for each component to be connected to this unit.
*
If you have YAMAHA components numbered as 1 , 2 , 3 , etc. on the rear panel, connections can be made easily by making
sure to connect the output (or input) terminals of each component to the same-numbered terminals of this unit.
: Refer to “ABOUT THE ACCESSORY TERMINALS” on page 10.
FM
GND
ANT
AM
ANT
GND
75 Ω
UNBAL.
PHONO CD AUX TAPE
or or
TAPE
PB
REC
OUT
A OR B : 6 Ω MIN./SPEAKER A B : l2 Ω MIN./SPEAKER
SPEAKERS
A
B
I20V 60Hz
I00W MAX. TOTAL
AC OUTLETS
SWITCHED
3
1
5 4 6
OUTPUT
LINE OUT
LINE IN
AUDIO OUT
OUTPUT
GND
(U.S.A. model)
Compact disc player Video cassette player,
LD player, etc. Speakers B
Right Left
Right Left
Turntable Tape deck Speakers A
To AC outlet