Zebra Technologies Strata Thermal Printers - Manual (Page 43)

Cleaning Your
Printer
You have easy access to all of the printer’s me-
dia path areas to allow for cleaning and clearing
of media jams. You can clean the sensor areas,
print head, platen roller and areas adjacent to
the media path surfaces.
Warning -Shock Hazard - See page vi.
Always turn the printer off before cleaning.
Warnung - Elektrische Gefahr - Zuerst
abschalten dur Drucker. Säubern Sie jetzt den
Drucker.
Use a brush or vacuum to clean the media path
(except the print head). If necessary, use a
lint-free cloth very lightly moistened with water
to clean the platen. Let the platen dry before
loading labels.
Warning - Static Discharge - See page vi.
Never touch the print head. Always clean the
print head with a cleaning pen (to protect the
print head from static discharge and fibers).
If a label has become jammed in the printer,
remove the label and any adhesive residue,
immediately. Adhesive may spread through out
the printer’s media path if not completely
removed. Many adhesives are permanent and
have short “set” times.
980181-001 Rev.C
35
Operation