Zebra Technologies Strata Thermal Printers - Manual (Page 59)

Media • Type: roll-fed, die-cut, continuous or fan-
fold labels, tags or tickets
• Materials: thermal transfer or thermal sensi-
tive papers
• Maximum media width: 8.75" (222.3mm)
• Minimum media width: 4" (102mm)
• Maximum media length: 11" (279mm) stan-
dard, 22" (559mm) optional with maximum
print width set. Note: The actual print length
is dependent upon the programmed print
(image) width and the maximum length will
increase as the print area is narrowed.
• Minimum media length: .5" (12.7mm)
With optional cutter: 1.25” (31.75mm)
• Media thickness (w/ liner): .003" (.08mm) to
.0075" (.19mm)
• Internal supply roll capacity: 5" (127mm)
O.D.
Ribbons • Wax, Wax/Resin and Resin
• Standard widths: 4.33" (110mm), 5"
(127mm), 6" (152mm), 6.5" (165mm), 7"
(178mm) and 8.66" (220mm)
• Standard length: 6.142" (156m), on a 1"
(25mm) I.D. Core
Communications
Interface
• RS232C
• Centronics parallel
• Xon/Xoff, hardware handshaking
• Programmable 7 or 8 bit data length, 1 or 2
stop bits, selectable parity
• 4,800 to 38,400 baud rates
980181-001 Rev.C
51
Printer Features