ZyXEL Communications 200 Series - Manual (Page 600)

Chapter 35 User/Group
ZyWALL USG 100/200 Series User’s Guide
600
Figure 445 Object > User/Group > Setting
The following table describes the labels in this screen.
Table 196 Object > User/Group > Setting
LABEL DESCRIPTION
User Default Setting
User Type Select the default user type when you create a new user account. You can still
change the user type for each user account.
Lease Time Select the default lease time when you create a new user account. You can
specify 1 to 1440 minutes. You can enter 0 to make the number of minutes
unlimited. You can still change the lease time for each user account.
Reauthentication
Time Select the default reauthentication time when you create a new user account.
You can specify 1 to 1440 minutes. You can enter 0 to make the number of
minutes unlimited. You can still change the reauthentication time for each user
account.
User Logon Setting
Limit ... for
administration
account Select this check box if you want to set a limit on the number of simultaneous
logins by admin users. If you do not select this, admin users can login as many
times as they want at the same time using the same or different IP addresses.
Maximum number
per administration
account This field is effective when Limit ... for administration account is checked.
Type the maximum number of simultaneous logins by each admin user.
Limit ... for access
account Select this check box if you want to set a limit on the number of simultaneous
logins by non-admin users. If you do not select this, access users can login as
many times as they want as long as they use different IP addresses.