ZyXEL Communications 200 Series - Manual (Page 798)

Appendix A Log Descriptions
ZyWALL USG 100/200 Series User’s Guide
798
Master firmware
version can not be
recognized. Stop
syncing from Master.
Synchronizing stopped because the firmware version file was not
found in the Master. A Backup device only synchronizes from the
Master if the firmware versions are the same between the Master and
the Backup.
Device HA Sync has
failed when syncing %s
for %s due to bad
\"Sync Password\".
The synchronization password was incorrect when attempting to
synchronize a certain object (AV/AS/IDP/Certificate/System
Configuration).
1st %s: The object to be synchronized, 2ed %s: The feature name for
the object to be synchronized.
Device HA Sync has
failed when syncing %s
for %s due to bad
\"Sync From\" or
\"Sync Port\".
The Sync From IP address or Sync Port may be incorrect when
synchronizing a certain object (AV/AS/IDP/Certificate/System
Configuration).
Device HA Sync has
failed when syncing %s
for %s.
Synchronization failed when synchronizing a certain object (AV/AS/
IDP/Certificate/System Configuration) due to an unknown reason, 1st
%s: The object to be synchronized, 2ed %s: The feature name for the
object to be synchronized.
Sync Failed: Cannot
connect to Master when
syncing %s for %s.
Synchronization failed because the Backup could not connect to the
Master. The object to be synchronized, 2ed %s: The feature name for
the object to be synchronized.
Backup firmware
version can not be
recognized. Stop
syncing from Master.
The firmware version on the Backup cannot be resolved to check if it is
the same as on the Master. A Backup device only synchronizes from
the Master if the Master and the Backup have the same firmware
versions.
Sync failed: Remote
Firmware Version
Unknown
The firmware version on the Master cannot be resolved to check if it is
the same as on the Master. A Backup device only synchronizes from
the Master if the Master and the Backup have the same firmware
versions.
Master firmware
version should be the
same with Backup.
The Backup and Master have different firmware versions. A Backup
device only synchronizes from the Master if the Master and the Backup
have the same firmware versions.
Update %s for %s has
failed.
Updating a certain object failed when updating (AS/AV/IDP/Certificate/
System Configuration). 1st %s: The object to be synchronized, 2ed
%s: The feature name for the object to be synchronized.
Update %s for %s has
failed: %s.
Updating a certain object failed when updating (AS/AV/IDP/Certificate/
System Configuration) due to some reason. 1st %s: The object to be
synchronized, 2ed %s: The feature name for the object to be
synchronized.
Device HA has skipped
syncing %s since %s is
%s.
A certain service has no license or the license is expired, so it was not
synchronized from the Master. 1st %s: The object to be synchronized,
2ed %s: The feature name for the object to be synchronized, 3rd %s:
unlicensed or license expired.
Device HA
authentication type
for VRRP group %s
maybe wrong.
A VRRP group’s Authentication Type (Md5 or IPSec AH) configuration
may not match between the Backup and the Master. %s: The name of
the VRRP group.
Device HA
authenticaton string
of text for VRRP group
%s maybe wrong.
A VRRP group’s Simple String (Md5) configuration may not match
between the Backup and the Master. %s: The name of the VRRP
group.
Table 297 Device HA Logs (continued)
LOG MESSAGE DESCRIPTION