Zanussi ZKT 662 LN - Manual (Page 14)

157
Indicating the selected
power level
In order to have the current power level indicated in the
Power Level indicator, briefly press (0.5 secs) the cor-
responding Cooking zone control (2).
Changing the Power Le-
vel during the Boost fa-
cility
1. The cooking zone required must be activated.
The dot (13) must be lit in the respective cooking
zone, display.
2. Select another power level using the increase con-
trol (5).
If the power level is increased using the inrease control
(5), the time that has already expired will be taken into
consideration in the calculation of the new defined ti-
me/power level.
Example:
You have selected power level 1
(boost--1 minute), and wait 30 seconds.
If you then switch to power level 4
(boost--6.5 minutes), the heat--up time
will continue for 6 minutes (6.50 minus
0.50).
Changing the power level with the decrease
control (4) will switch off the automatic heat--up
function.
Take advantage of
the residual heat by
the Boost facility
For saving energy make use of the residual heat by
continuing cooking on a still hot cooking zone. This
means the time for the boost facility will become shor-
ter depending on the temperature of the still hot coo-
king zone.
Switching off the Boost
facility
As soon as “A“ appears in the Power Level indicator:
1. The cooking zone required must be activated.
The dot (13) must be lit in the respective cooking
zone.
2. Press the decrease control (4).
13
+
5
13
--
4