Cleaning and care, Cleaning after each use, Stain removal – Zanussi ZKT 662 LN User Manual

Page 19: Special problems

Advertising
background image

162

Cleaning and care

Before cleaning, make sure the hob is cool and discon-

nected from the power supply.

Never use aggressive or abrasive agents,

such as oven sprays, stain or rust removers,

scouring powder, or sponges with an abrasive

effect.

Special cleaning agents such as Hob Brite and ce-

ramic hob scrapers are available from department

stores, electrical specialist shops, and in drug and

grocery stores.

Cleaning after each use

·

Slight, non--burnt soiling can be wiped off with

a damp cloth.

·

Burnt soiling has to be removed with a scraper.

Afterwards wipe off the ceramic hob with a damp

cloth, and Hob Brite.

Stain removal

·

Light metallic stains (aluminium residues) can

be removed from the cooking zone with a ceramic

hob cleaning agent such as Hob Brite when cool.

·

Sugar solutions, food stuffs with a high sugar

content, plastics, or kitchen foil -- must be re-

moved immediately with a scraper. If this type of

soilage is not removed immediately it can cause ir-

reparable damage to the ceramic surface. When

the surface has cooled wipe over with a damp cloth

and Hob Brite.

·

Before using any detergent or cleaning agent on

the ceramic top, ensure they are recommended by

the manufacturer for use on ceramic hobs.

·

Do not apply any cleaning agents to hot cooking

zones. Ensure any residues are wiped off before

the cooking zones are used again.

Special problems

Special problems

.. if a chemical cleaner proves inadequate

Check whether the use of a scraper is more effective.

.. when darks stains occur

If the use of a scraper and a stainless steel cleaning agent proves

unsuccessful, your decor surface has most likely been abraded by using

unsuitable cleaning agents, or by pan bottoms with a scouring effect.

This will not impair the efficiency of your cooking surface.

.. when metallic discolourations appear on

the cooking zones

Pots and pans with unsuitable bottoms, or unsuitable cleaning agents have

been used. The discolourations can only be removed with considerable

effort, using a ceramic glass or stainless steel cleaning agent.

.. when the surface shows scratches or

impressions

These blemishes, caused by scraping or melted on objects, cannot be

removed. This will not impair the efficiency of your cooking surface.

We accept no liability for improper handling of the ceramic cooking surface!

Advertising