Yamaha DRX-1 EN - Manual (Page 24)

20 O PERATION
Analog output
Select Stereo, Surround or 3D Sound. Factory setting is
Stereo.
Surround :
Select this setting when using equipment
with a Dolby Surround Pro Logic decoder. In
this setting the 5.1 audio channels (Dolby
Digital, MPEG-2) are downmixed to a Dolby
Surround-compatible 2-channel output.
3D Sound : In a setup without rear speakers (analog
stereo output), this option remixes the six
channels of digital multichannel (Dolby
Digital, MPEG-2) into a two speaker output,
while retaining the original audio
information.
The result is the listening sensation of being
surrounded by multiple speakers.
Night mode
Night mode optimizes the dynamics of the sound with low
volume playback for less disturbance in quiet
environments. This only works for Dolby Digital audio on
DVD video discs.
r Language settings
The preferred language can be adapted via the system
menu bar. Also see ‘Initial setup Language.’ Settings can be
changed for:
- Playback audio
- Recording audio
- Subtitle
- Menu (DVD Recorder system menus only)
Recording audio
You can set a preference for recording a stereo or
secondary audio program. Select ‘Stereo’ or ‘SAP.’
This setting applies only if the broadcast contains stereo
or SAP. SAP usually means a program is broadcast in a
different language or with additional information.
Feature settings
Access Control
Access Control contains the following features:
Child Lock - When Child Lock is on, a 4-digit code needs to
be entered in order to play discs.
Parental Level - Allows the conditional presentation of
DVD-Video discs rated according to Parental Level
information.
Change Country - Allows conditional presentation of DVD-
Video discs rated according to country information.
Change Code - To change the 4-digit code.
Adapt disc format
This option is only available when a DVD+RW/+R disc
recorded on a different brand of recorder is loaded. You
can adapt the menu to your own recorder.
A DVD+RW/+R disc recorded on a different type of
Recorder can play, but may not provide all features
commonly available, such as the on-screen disc bar, disc
settings menu, title settings menu, and editing. If the disc is
not write protected,
the disc format can be adapted to this Recorder, after
which these functions are available.
Status box
The status box displays the current status of the Recorder
and the disc type loaded (see ‘Operation - On-screen
display information - Status box’). You can switch it on or
off.
Off =
always Off. Status boxes do not appear.
On = Status box appears with the system menu bar or
is displayed temporarily (disappears after time-
out) when changing the playback or record status.
Factory setting is ‘On.’
Auto resume
The Auto resume setting only applies to the last 20 pre-
recorded DVD Video and Video CD discs you played.
If Auto resume is ‘On,’ playback will start from the point
where it stopped the last time the disc played.
When Auto resume is ‘Off,’ the Recorder will start playing
from the beginning of a disc. In this case, you can still
resume from the last point it stopped when
appears
on the TV screen by pressing .
Factory setting is ‘On.’
Connected audio system Digital out Analog out
Amplifier or TV with two channel
analog stereo Off Stereo
Amplifier or TV with Dolby Surround
or Dolby Pro Logic Off Surround
Amplifier with two channel digital
stereo PCM only Stereo
A/V receiver with Multi-channel
decoder (Dolby Digital, MPEG, DTS) All Stereo or Sur-
round
Digital output
Analog output
Night mode
Sound
-- --- off on off
Stereo
Surround
3D sound