Automatic tuning, Tuning to preset stations, Fm am – Yamaha RXV3000RDS User Manual
Page 32: For manual tuning
Introduction
Preparations
Basic Operation
Advanced
Operation
Additional
Information
Appendix
30
AM/FM Tuner
Automatic Tuning
1
1
Select “TUNER” as the input source.
You can use the
INPUT
selector on the main unit or the input button on the
remote control.
2
2
Press
AM/FM
to select the reception band.
“FM” or “AM” appears in the display.
3
3
Press
TUNING MODE
so that the AUTO tuning indicator appears in the
display.
If the colon (:) appears in the display next to the AM or FM indicator, press
PRESET/TUNING
to turn it off.
4
4
Turn the Multi jog knob clockwise or counterclockwise to start automatic
tuning.
Turn the Multi jog knob clockwise to tune to a higher frequency or
counterclockwise to tune to a lower frequency.
Use manual tuning if the tuning search does not stop at the correct station
because the signals are weak.
■
For manual tuning
1
1
Press
TUNING MODE
so that the AUTO tuning indicator goes off in the
display.
If the colon (:) appears in the display next to the AM or FM indicator, press
PRESET/TUNING
to turn it off.
2
2
Turn the Multi jog knob clockwise or counterclockwise to tune to the desired
station manually.
Hold on the knob to continue the tuning search.
Automatic tuning is effective when the radio signals are strong and have no
interference. However, manual tuning is best for weaker signals that have some
interference.
Note:
• Manually selecting an FM station will automatically change the reception to monaural to
increase the signal quality.
Tuning to Preset Stations
1
1
Press
PRESET/TUNING
so that the colon (:) appears next to the AM or FM
indicator.
The colon (:) must appear in the display to recall preset stations. If necessary,
press
PRESET/TUNING
again.
2
2
Turn the Multi jog knob clockwise or counterclockwise to select the desired
preset station number.
The preset number appears in the display along with the band, frequency and
signal strength information.
FM/AM
FM
AM
or
TUNING
MODE
AUTO/NAN'L MONO
AUTO
A
:FM 89.
Turn this indicator off.
A
:FM
PRESET
/TUNING
EDIT
A1
—
A2
A8
—
B1
E8
—
E7
C1
—
B8