Exchanging preset stations, A-1:fm 89.0 mhz, E-1:fm a-5:fm – Yamaha RXV3000RDS User Manual

Page 34: Edit e1-a5

Advertising

Introduction

Preparations

Basic Operation

Advanced

Operation

Additional

Information

Appendix

Press

MEMORY (MAN’L/AUTO FM)

The station band and frequency appear in the display with the preset group
and number you selected.

Repeat steps 1 through 4 to store other stations.

You can store up to 40 stations (A1~A8, B1~B8, C1~C8, D1~D8, and
E1~E8).

AM/FM Tuner

MEMORY

MAN'L/AUTO FM

A-1:FM 89.0 MHz

STEREO

MEMORY

D-TV/LD

DVD

CABLE

MD/TAPE

SAT

CD-R

VCR 1

TUNER

VCR2/DVR

V-AUX

PHONO

Shows the displayed station has been
programmed to A-1.

Exchanging Preset Stations

You can exchange the stations stored on two preset numbers. The example below
describes the procedure for exchanging the stored stations at preset numbers E1 and
A5.

Tune to the E1 preset station number.

See “Tuning to Preset Stations.”

Press and hold

PRESET/TUNING (EDIT)

for more than 3 seconds.

“E-1” flashes in the display.

Tune to the A5 preset station number.

See “Tuning to Preset Stations.”
A-5 flashes in the display.

Press

PRESET/TUNING (EDIT)

again.

The stations stored at the two preset locations are exchanged.

Notes:

• The memory back-up circuit prevents the stored data from being lost even if this

unit is set to standby mode, the power cord is disconnected from the AC outlet, or
power service is temporarily cut due to power failure. However, if the power is cut
for more than one week, the memory may be deleted.

• Any stored station data existing at a preset number is cleared when you store a new

station at that preset number.

• The reception mode (stereo or monaural) is stored along with the station frequency.

PRESET

/TUNING

EDIT

E-1:FM

A-5:FM