Yamaha RXV3000RDS - Manual (Page 5)

English
3
Getting Started
Checking the Package Contents
Check your package to make sure it has the following items.
Installing Batteries in the Remote Control
Insert the batteries in the correct direction by aligning the + and – marks on the batteries with the polarity illustrations (+ and –) inside the
battery compartment.
Change the batteries periodically. Do not use old batteries together with new ones.
Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different
types of batteries may have the same shape and color.
■ About changing batteries
As the batteries wear out, the operating range of the remote control decreases and
the
TRANSMIT indicator does not flash or its light becomes dim. When you
notice any of these conditions, change all of the batteries.
Notes:
• If the remote control is without batteries for more than 20 minutes, or if worn out
batteries remain in the unit, the contents of the memory may be cleared.
If the memory is cleared, insert new batteries and reprogram any functions that may have
been cleared.
• After you insert new batteries, be sure to push RESET in the battery compartment using
a ball point pen or similar object before using the remote control. (This does not clear the
contents of the memory.)
Using the Remote Control
The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main
unit to operate. When the sensor is covered or there is a large object between the remote control and the main unit, the sensor cannot receive
signals. The sensor may not be able to receive signals properly when it is exposed to direct sunlight or a strong artificial light (such as a
fluorescent or strobe light). In this case, change the direction of the light or reposition the main unit to avoid direct lighting.
■ About handling the remote control
Handle the remote control with care.
Do not spill water or other liquids on the remote control.
Do not drop the remote control.
Do not leave or store the remote control in the following types of conditions:
• high humidity or temperature such as near a heater, stove or bath; or
• dusty places; or
• in places subject to extremely low temperatures.
Remote Control
Alkaline Batteries (3) (LR6)
Quick Reference Guide
AM Loop Antenna
Power Cord
FM Antenna
Reset button
STANDBY /ON
NATURAL SOUND AV RECEIVER RX–V3000RDS
INPUT MODE INPUT VOLUME
SILENT
PHONES
SPEAKERS B A
PROCESSOR DIRECT BASS EXTENSION
BASS TREBLE REC OUT VIDEO AUX VCR 1 SAT CABLE D-TV/LD DVD SOURCE MD/TAPE CD-R TUNER CD PHONO VCR 2/DVR
EFFECT
6CH INPUT
EON PTY SEEK
MODE START
RDS MODE TUNING MODE MEMORY
S VIDEO VIDEO L R OPTICAL AUDIO MAN'L/AUTO FM AUTO/NAN'L MONO
FM/AM PRESET
/TUNING
DSP PROGRAM
EDIT
VIDEO AUX
30
°
30
°
Approximately 6m
(20 feet)
Quick Reference Card
■ Remote Control ■ TUNER ■ CD button (CD area)
■ MD/TAPE button (MD area) ■ CD-R button (CD-R area)
V655120
Infrared window
CLEAR RE-NAME TRANSMIT STANDBY SYSTEM POWER
Display Source selector LIGHT
Operational buttons
10 KEY/DSP
Operational buttons
LEVEL ON SCREEN SLEEP TEST
LEARN
MACRO
MACRO ON/OFF
A button Input buttons
6CH INPUT
Sound program selector/
Numeric buttons
MUTE
VOLUME +/–
EFFECT
PARAMETER/SET MENU Cursor buttons
Cover
POWER
Preset number 1 to 8
Preset group A through E from left. Preset group A/B/C/D/E
Preset +/–
(Set 10KEY)
POWER
DISPLAY SEARCH Skip Search STOP
PLAY
PAUSE (/Stop)
Numeric buttons 1 to 9
Numeric button +10
Numeric button 0
DISC +/– (Disc Skip)
TV VOL +/–, TV INPUT, and TV MUTE
function if you have set up the
manufacturer code for the TV Area.
CLEAR
INDEX
(Set 10KEY)
POWER REC/PAUSE
DISPLAY SEARCH Skip Search
Numeric buttons 1 to 9
Numeric button +10
Numeric button 0
(Set 10KEY)
STOP
PLAY
PAUSE
TV VOL +/–, TV INPUT, and TV MUTE
function if you have set up the
manufacturer code for the TV Area.
POWER REC/PAUSE
DISPLAY SEARCH SOUND
Skip Search
STOP
PLAY
PAUSE
Numeric buttons 1 to 9
Numeric button +10
Numeric button 0
TV VOL +/–, TV INPUT, and TV MUTE
function if you have set up the
manufacturer code for the TV Area. INDEX (Set 10KEY)
When finding it difficult to fit this unit onto the shelf, remove the side panels after removing the screws tightened on the side panels. Put this
sticker to cover the screw holes after tearing off the back side of the sticker.
Side Panel Sticker
R L