Yamaha GX-900 - Manual (Page 37)

29
KK 10K
PROGRAM
O LOGIC HALL
TEREO YMERSION
EDIT
PROG
S F REP
VOLUME A B OVER 15
1 2 3 4
7 8 9 10
13 14 15
5
11
6
12
TRACK
VCD PBC
TIMER
SLEEP
NOR TEST
PHANTOM
RANDOM TUNER
MD
TAPE
PROGRAM
O LOGIC HALL
STEREO YMERSION EDIT
PROG
S F REP
VOLUM A B OVER 15
1 2 3 4
7 8 9 10
13 14 15
5
11
6
12
TOTAL
TRACK
VCD PBC
TIMER
SLEEP
NOR TEST
PHANTOM
RANDOM TUNER
MD
TAPE
5K 5K 10K
Playing an MD
Program play
You can program up to 30 tracks in any desired order.
1
When the MD recorder is stopped, press PROG to prepare
for programming.
* “PROG” (
C
) and “P-01” (
1
) will light up on the display,
and all track numbers on the disc (
0
) will begin
flashing.
2
Program the desired track number by using the numeric
buttons.
* The selected track number and the total play time of the
programmed tracks (
1
) will light up on the display, and
soon it will be replaced by the display of the next play
order. Programmed track numbers on the disc will stop
flashing and light up on the music calendar (
0
).
* Pressing TIME displays the total play time of the
programmed tracks (
1
) for about 1 second, and then it
is replaced by the display of the next play order.
3
Repeat step 2 to program more tracks. You can select the
same track again.
4
Press to start the program play.
Notes
● Skip ( / ) and search can be used during play, but
only within the range of the programmed tracks.
● If the total time exceeds 255 minutes, “255mOver” is
displayed instead of the total time.
To cancel a programmed sequence
There are several methods as described below.
● Press while the MD recorder is stopped.
● Eject the MD.
● Turn this system into the standby mode.
To check (and correct) program data
1. Press PROG when the MD recorder is stopped.
2. Every time
is pressed, the track numbers and
sequential order of the programmed tracks can be checked
one after another. The display of the track number can be
returned (sequentially in reverse order) by pressing
.
3. If you want to correct the program data, press a numeric
button to select the track to replace the one displayed. The
previously programmed track will be cleared from the
memory and the new one will be programmed.
To complete the correction, press PROG or
/ once
again.
1
1
A B C D E F G H I J K L M N O
P Q R S T U V W X Y Z /
2
2
3
3
4
4
5
5
6
6
7
7
8
8
R. TIME
C
EDIT
D
+ I0
E
MODE REPEAT RANDOM
SPACE
TUNER
DISC SKIP
9 0
PRESET
TIME
A
PROG
B
CD
INPUT MODE M–MARK SCROLL
TAPE
MD
REC/PAUSE
ENTER DELETE REC/PAUSE
DIRECTION
MD EDIT
Display information during programming
Play order
Selected track
number
Total playing time
Numeric
buttons
RANDOM REPEAT
PROG
Random play
All the tracks on a disc can be played randomly.
Press RANDOM to begin random play.
* The “RANDOM” indicator (
2
) will light up.
To cancel the random play
Press , or press RANDOM so that the “RANDOM” indicator
(
2
) will go out.
Note
This feature will not function during programming or program
play.
(off) S REP
F REP
Repeat play
A disc, a single track or a programmed sequence can be
continuously repeated.
Press REPEAT once or more to select the desired repeat play
mode so that the S REP or F REP indicator (
3
) is
illuminated.
Repeat play modes
SINGLE REPEAT (S REP)
A single track is played repeatedly.
FULL REPEAT (F REP)
The disc is played repeatedly.
To cancel the repeat play
Press REPEAT once or more so that the (S, F) REP indicator
(
3
) goes out.
TIME