Yamaha GX-900 - Manual (Page 46)

38
1
Press CHARACTER.
* The cursor appears on the display.
2
Press CHARACTER repeatedly to select the group of
capital letters “ABC..”, small letters “abc..” or numbers
“012..”.
* If you need the group of symbols, select “012..”.
3
Turn the jog dial or press a character button (on the
remote control) to select the desired character.
Examples of using the character buttons on the
remote control
● To select “C”
After selecting “ABC..” in step 2, press ABC repeatedly
until “C” appears on the display.
● To select “e”
After selecting “abc..” in step 2, press DEF repeatedly
until “e” appears on the display.
● To select “7”
After selecting “012..” in step 2, press 7 (STU).
4
Press SET to store the selected character.
* The cursor moves to the next character position.
5
Repeat steps 2 to 4 to complete the titling.
To delete a character (ABCD
→
ABD)
1 Use or to move the cursor to the position of
the character you want to delete.
2 Press DELETE.
To insert a character (ABCD
→
ABTCD)
1 Use or to move the cursor to the position
where you want to insert the character.
2 Use CHRACTER and the jog dial to select the new
character.
3 Press SET to set the character. The character
previously in that position automatically moves to the
right.
To insert a space (ABCD
→
AB CD)
1 Use or to move the cursor to the position
where you want to insert the space.
2 Press SPACE on the remote control.
6
Press ENTER to exit the titling mode.
* If a title consists of more than 12 characters, it will
scroll across the display once, and then be displayed
in abbreviated form (first 12 characters only).
To undo titling
1 Press to display the total tracks and total playing
time on the disc.
2 Press MD EDIT repeatedly to display “Undo Title”, then
press ENTER.
* “Undo OK ?” appears on the display.
3 Press ENTER again to undo.
7
Store the title(s) you made on the MD by following the
procedure of the TOC Write function on page 37 or by
ejecting the MD.
Note
When titling a track during play, the current track is
repeatedly played while entering the title.
Editing and titling an MD
Titling an MD or track
This function lets you title recorded MDs and individual
tracks. Titles may consist of capital and small letters,
numbers, and symbols for a maximum of 250 characters for
each title.
To title a disc
Make the following titling operation when the MD recorder
is stopped.
To title a track
Make the following titling operation during play, pause or
recording. The currently selected track or currently
recorded track is titled.
If the MD recorder is stopped, use the jog dial or press
/ to select the track you want to title.
DOWN UP
STANDBY/ON
MINIDISC RECORDER
MD TAPE
DIRECTION
YMERSION B.BOOST MUSIC INPUT INPUT
MIN
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
DOLBY NR
HOUR
RANDOM REPEAT TIME
DISPLAY MODE
MD EDIT DELETE PAUSE/ENTER
MD CHARACTER SET
REC/PAUSE
TAPE
1
1
A B C D E F G H I J K L M N O
P Q R S T U V W X Y Z /
2
2
3
3
4
4
5
5
6
6
7
7
8
8
R. TIME
C
EDIT
D
+ I0
E
MODE REPEAT RANDOM
SPACE
TUNER
DISC SKIP
POWER SLEEP INPUT VOLUME
9 0
PRESET
TIME
A
PROG
B
CD
/I
YMERSION BASS BOOST MUSIC
INPUT MODE M–MARK SCROLL
TAPE
MD
REC/PAUSE
ENTER DELETE REC/PAUSE
DIRECTION
MD EDIT
/DELETE
SET
SPACE
CHARACTER
MD EDIT
ENTER
Jog dial
MD EDIT ENTER
/DELETE
Character
buttons