Yamaha RX-V2700 - Manual (Page 38)

36
En
AUTO SETUP
3
Make sure of the following check points
before starting the Auto Setup operations.
• Speakers are connected appropriately.
• Supplied optimizer microphone is connected to this
unit and placed appropriately.
• Headphones are disconnected from this unit.
• The room is sufficiently quiet.
• The video monitor connected to this unit is turned on.
4
Set the operation mode selector to AMP and
then press SET MENU to turn on the GUI
screen.
The GUI screen appears on the video monitor.
5
Press k / n repeatedly and then h to select
“Auto Setup”.
“Setup Menu” is selected as the currently selected
menu item.
6
Press h to enter “Setup Menu”.
7
Press k / n repeatedly to select “Wiring”,
“Distance”, “Size”, “Equalizing”, or “Level”,
and then press
h to set the selected
parameter.
8
Press k / n repeatedly to select the desired
parameter and then ENTER to confirm the
selection.
\
MENU
SRCH MODE
SET MENU
Sound
Video
Option
Basic
NET/USB
Manual Setup
Auto Setup
System Memory
Input Select
Stereo/Surround
TV
SOURCE
AMP
Currently
selected menu
item
A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E
PRESET/CH
ENTER
Information
Start
Setup Menu Auto Setup
System Memory
Signal Info.
Manual Setup
Input Select
Setup Menu
Start
Wiring
Distance
Size
Information
Wiring
Distance
Skip
Check
Size
A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E
PRESET/CH
ENTER