Xantrex Technology RC/GS RC7 - Manual (Page 46)

Operation
34 975-0210-01-01
Inverter Mode Messages
When the inverter is on (no AC present), it is either inverting
or searching the AC output circuits for a load meeting the
specifications set up in the Set Idle menu selection (see
Figure 3-3 on page 13), if the search sense mode is selected.
When the inverter is in the search sense mode, “Searching”
appears in the screen and the Inverter LED will slowly flash.
When the inverter/charger is in the inverter mode (no AC
available), “Inverting” appears in the screen and the green
Inverter LED is on solid.
Figure 4-7 Inverter in Search Mode
Figure 4-8 Inverter Mode
Note:
The Inverter LED flashes during the charge mode if the
inverter is switched on. The Inverter LED turns off if the inverter
is switched off.
Inverter
Charge
Batt. Full
Error
822-4A-001
System Status:
Searching
Green LED slowly flashes and
“Searching” appears in the LCD
Inverter
Charge
Batt. Full
Error
822-4A-001
System Status:
Inverting
Green LED is on solid and
“Inverting” appears in the LCD
RC-GS_manual.book Page 34 Thursday, May 26, 2005 4:58 PM