Yamaha CDR-HD1500HDD - Manual (Page 50)

44
COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC
Copy Level
Setting of the sound level for copying. Sound level adjustment is
not normally necessary. However it is possible to adjust the copying
sound level to suit you needs.
Adjustment is possible in the –12dB to +12dB range by 0.4dB
steps.
Memo
• Level adjustment is not possible during copying.
• If the red part on the peak level meter lights at the loudest sound
levels, stop copying to adjust the copying level, and then resume
copying.
• When copy level is adjusted, the unit automatically creates an
image file on the HDD with 1x or 2x speed before starting the
disc copy process.
C o p y L e v e l REC
CDR
L
R
dB –30 –10 –6 –2 0 ALL SYNC ANLG
L e v e l 0 . 0 d B REC
LEVEL
CDR
L
R dB –30 –10 –6 –2 0 ALL SYNC ANLG
Copy Speed
Setting of the copying speed.
Initial setting: Best Effort
Best Effort
Copying is made at Max. 8x speed for a CD-R disc and 4x speed
for a CD-RW disc.
4x Copy
Copying is always made at 4x speed.
Memo
• Depending on the condition of the CD-R disc, the copy speed
may drop automatically even when “Best Effort” is selected.
• When “Analog Copy” or “Auto Dig/Anlg” is selected in “Copy
Method” (P.43), the unit automatically creates an image file on
the HDD with 1x or 2x speed before starting the disc copy
process.
• The settings is stored in the memory and applied to future
copying.
Imaging Speed
When copy level is adjusted or when carrying out an analog copy,
the unit automatically creates an image file on the HDD before
starting the disc copy process. By this setting, you can select 2x or
1x speed applied for an image file creation process.
Initial setting: 2x
2x
An image file is made at 2x speed.
1x
An image file is made at 1x speed.
C o p y S p e e d REC
CDR
L
R dB –30 –10 –6 –2 0 ALL SYNC ANLG
I m a g i n g S p e e d REC
CDR
L
R dB –30 –10 –6 –2 0 ALL SYNC ANLG
104_HD1500(E)38-49.p65 5/23/05, 19:03 44