Yamaha CDR-HD1500HDD - Manual (Page 57)

51
English
EDITING
5
■ Entering characters in the edit
menu
Entering the title characters by using the
MULTI JOG knob
1.
Rotate the MULTI JOG knob.
When the MULTI JOG knob is rotated clockwise, characters
appear in the order of alphabetical capital letters, alphabetical
lower case letters, numbers, and symbols.
2.
Press the MULTI JOG knob to confirm the selected
character.
The cursor moves to the next space. Repeat steps 1 and 2 until
the title is complete. A title can contain up to 32 characters.
Entering the title characters by using the
alphabetical/numeric buttons on the remote
control
1.
Select the character to be used for the title by using
the alphabetical/numeric buttons on the remote
control.
Alphabetical capital letters, alphabetical lower case letters, and
numbers switch each time the buttons are pressed. To insert a
space, press SPACE. To use a symbol, press SYMBOL to select
the desired symbol.
2.
Select the next character by pressing one of the
alphabetical/numeric buttons.
The cursor automatically moves to the next space. When you
need to use the button same to step 1, press Y to move the
insertion point, then press the alphabetical/numeric button.
Correcting the characters
Move the cursor to the character to be corrected by pressing
t
/e or r/y (T or Y on the remote control). To clear the
selected character, press CLEAR. To insert a character before the
selected character, use the MULTI JOG knob or alphabetical/
numeric buttons to select the character.
LIST OF EDIT MENU
105_HD1500(E)50-57.p65 3/18/05, 15:43 51