Zanussi ZHC 916X - Manual (Page 16)

16
Air outlet directed upwards (Fig. 2a-b):
- Remove the plastic plug from the upper part of
the venting grill and replace it on the rear part (Fig.
16).
Air outlet directed towards the wall (Fig. 3):
- Remove the plastic frame from the air outlet (Fig.
17).
- Remove the plug from the upper part of the ducting
fan unit (Fig. 18), as it is not possible to insert the
flange F with the plug in place.
- Fit the flange F Ø 120 or 150 mm (Fig. 19), replace
the plug.
Air outlet directed to the left or right hand side (Fig. 4a-
b):
- Remove the four screws fastening the plastic fra-
me, as shown in Fig. 17.
- Fit the ducting spigot R (Fig. 20) and replace the
four screws removed as above.
INSTALLATION INSTRUCTIONS
16
17
18
19
20