Zanussi ZHC 916X - Manual (Page 7)

7
To Remove the Charcoal Filter
Push inwardly on the two retaining clips to disengage
the security fixing and remove.
This appliance can be a fire hazard if the
grease and charcoal filters are not
cleaned and replaced as recommended.
Worktop Lighting
The lamps should be replaced with a 220-240V 20W
halogen spot lamp.
To Remove the Lamps
Unscrew the two screws to release the metal surround.
Remove a lamp from the holder by pulling the lamp
downwards.
When fitting the new lamp ensure the two pins are
correctly inserted into the slots in the lamp holder.
Charcoal filters, grease filters and lamps can be
obtained from your local Service Force Centre.
S07_2
S07_3
S07_28
MAINTENANCE AND CLEANING