About the display – Yamaha RP-U200 User Manual

Page 12

Advertising
background image

E-

8

CONTROLS AND THEIR FUNCTIONS

About the display

This section explains what the various display indicators mean.

1

VIRTUAL

This indicator appears when this unit is using Virtual 3D.

2

USB

This indicator appears when audio signals are sent or
received via the USB terminal.
* If you use a Macintosh computer, this indicator is

always illuminated when this unit is connected to the
computer via the USB terminals.

3

(DTS)

This indicator appears when an input signal is decoded
with DTS.

4

PCM

This indicator appears when a PCM digital audio signal
is selected as the input source.

5

This indicator appears when headphones are
connected to the headphone jack of this unit.

6

5.1CH

This indicator appears when a 5.1 channel digital audio
signal is selected as the input source.

7

DSP

This indicator appears when the DSP is processing the
input signal.

8

Sound output indicator

This indicator shows the currently used speakers. A red
dot shows that the corresponding speaker is currently
used, or the speaker is set for use in the Application
Software. The

mark shows that sound is outputted.

* When using the test tone, a red dot shows the

channel currently outputting the test tone.

* When using headphones, only the two dots for the left

and right front speakers appear regardless of the
setting in “Speaker Settings”.

9

D.

This indicator appears when an audio signal encoded
with Dolby Digital is selected as the input source.

0

ST

This indicator appears when a stereo broadcast is
received in stereo mode.

A

(DOLBY) DIGITAL

This indicator appears when an input signal is decoded
with Dolby Digital.

B

(DOLBY) PROLOGIC

This indicator appears when an input signal is decoded
with Dolby ProLogic.

C

FM

This indicator appears when the built-in FM tuner is

selected as the input source.

D

Multi-information display

Various messages and information appear here.

E

VOL (volume)

This indicator graphically displays the volume level
setting.

Note

The indicators

, “5.1CH” and

will not appear when

sound signals are decoded on the computer (by using DVD-

playback software, etc.).

VOL

VIRTUAL

5.I

CH

DIGITAL
PROLOGIC FM

ST

USB PCM

D. DSP

1

A

E

3

9
0

6

5

4

2

B
C
D

8

7

Advertising