Yamaha RP-U200 - Manual (Page 44)

E-
6
CONNECTIONS
+ –
R
L
R L
ANALOG
AUX 1
IN
AUX 2
IN
REC
OUT
OUTPUT
SUB
WOOFER
DIGITAL
USB
COAX
IN
OPT
IN
AUX 1
OPT IN
OPT
OUT
PC
SPEAKERS
4 Ω MIN.
/SPEAKER
REAR
+ –
R
L
FRONT
CENTER
ANTENNA
R L
PC IN
FM ANT
75 Ω UNBAL.
Front speaker (L) Front speaker (R)
Connecting speakers
To reproduce multi-channel surround sounds with this unit,
connect five speakers (Yamaha NS-U40P, etc.) to this unit
as follows: a pair of front speakers to the FRONT L and R
terminals, a center speaker to the CENTER terminal, and a
pair of surround speakers to the REAR L and R terminals.
When using only one pair of speakers, connect one
speaker to the FRONT L terminal, and the other to the
FRONT R terminal.
* When the supplied Application Software is installed on
the computer connected to this unit, the Application
enables you to make “Speaker Settings”. In the settings,
you can select the speakers to use and not to use, and
also set the sizes of the speakers to use. Refer to page
27 of the separate “OPERATION MANUAL” for details.
Notes
● Use speakers which do not have a built-in amplifier.
● Use speakers whose impedance is 4
Ω
or more.
● Connect the left speaker to the left speaker connector on
this unit and the right speaker to the right speaker
connector.
● Make sure that the + and – polarity markings of the
speaker cables are observed and set correctly. If these
cables are reversed, the sound will be unnatural and lack
bass.
Center speaker
Surround speaker (L) Surround speaker (R)
(U.S.A. model)