Yamaha LPX-500 - Manual (Page 33)

Ad
v
anced Operations
29
Image Color
Temp. Allows lighter colors to be adjusted so that they range from having a red
tinge to having a blue tinge. (p.24)
When the color temperature is lower, the red content is greater and color
tones appear softer. When the color temperature is higher, the blue content
is greater and color tones appear fresher. 7500K
Flesh Tone The "Flesh Tone" setting adjusts the green component of image signals.
(p.24)
If adjusted to the - side, the colors appear purplish. If adjusted to the + side,
the green component is increased. Adjust until the desired flesh tones are
obtained. 3
Color
Balance The Offset , Gain and Gamma can be adjusted separately for each
RGB component. (p.24)
Offset adjusts coloration for darker shades, Gamma adjusts intermediate
shades, and Gain adjusts brighter shades. The working of each adjustment
is shown below.
Each RGB component can be adjusted to give the desired level of
coloration to dark, intermediate and light ranges.
Offset
R : 0
G : 0
B : 0
Gain
R : 0
G : 0
B : 0
Gamma
R : 0
G : 0
B : 0
Sharpness Adjusts the image sharpness. 0
Memory
Save This lets you save image adjustment settings and to retrieve them by
pressing the corresponding remote control memory buttons.
The images being projected will be adjusted according to the settings that
are retrieved. (p.24)
•••• The current settings are saved to a particular recording area number when
that number is selected.
•••• The setting values that are saved to memory can be cleared by selecting
"Reset All".
-
Reset Image Resets all adjustment values for the “Image” menu functions to their
default settings. However, all settings that are stored in memory are
retained.
•••• Press the on either the projector's control panel or the remote control
to display the confirmation screen, and select “Yes”.
•••• Select “Reset All” to return all menu settings to their default settings.
(p.32)
-
Main menu Sub-menu Function
Default
setting
Offset adjustment Gamma adjustment Gain adjustment
When
adjusted to
the + side
When adjusted
to the - side
Input signal Input signal Input signal
Brightness Brightness
When adjusted
to the - side When adjusted
to the - side
Brightness
When
adjusted to
the + side
When
adjusted to
the + side
Image menu Setup menu
Signal menu Info menu