Yamaha LPX-500 - Manual (Page 79)

If connecting using a computer cable
To monitor port
(video port)
Computer cable
To INPUT B port
If connecting more than one projector together, make the
connection and then use the menus to change the "INPUT B
Signal" setting in the "Signal" menu to "RGB".
(" Signal " menu in OWNER'S MANUAL)
If video signals are being input to several input ports
simultaneously, interference between the various signals may occur,
and this may cause interference in the projected images. If this
happens, turn off the power supply or disconnect the video
equipment which is not currently being used.
Essen SET UP GUIDE English-10
10