Yamaha LPX-500 - Manual (Page 35)

Ad
v
anced Operations
31
Signal Setup Level (Adjustment is only possible when NTSC, 480i/p, 576i/p, 720p and 1080i
signals are being input.)
This setting does not normally need to be changed when connecting the
projector to video equipment that is designed for use within Japan.
If connecting the projector to video equipment outside Japan that has
different black level settings, or if connecting to equipment in Japan that
lets you vary the black level setting, you may need to use this command to
adjust the projected images so that they display correctly. Check the
specifications of the video equipment being connected before changing this
setting. 0%
Zoom
Subtitle Sets the display position and vertical enlargement ratio for "Zoom
-Subtitle-" images according to the selected aspect ratio.
•••• V size :This adjusts the vertical enlargement ratio without changing
the size in the horizontal direction.
•••• V position :This moves the display position up.
V Size : 2
V Position : 10
Setup Menu
Main menu Sub-menu Function
Default
setting
Setup Installation Selects the projection method in accordance with the projector and screen
setting-up method.
•••• :Projection from the front of the screen
•••• :Projection from the front of the screen with the
projector installed to the ceiling (upside down)
•••• :Projection from the rear of the screen
•••• :Projection from the rear of the screen with the projector
installed to the ceiling (upside down)
Keystone •••• Corrects keystone distortion in images. (p.12)
•••• When keystone correction is carried out, the projected image will become
smaller.
•••• The keystone correction settings are memorized, so that if you change the
position or angle of the projector, you may need to readjust the keystone
correction setting.
•••• If the images become uneven in appearance after keystone correction is
carried out, decrease the “Sharpness” setting.
0
No Signal Sets the screen status when no video signal is being input.
•••• Off :Screen is completely black.
•••• Black :Screen is completely black and a no signal message appears.
•••• Blue :Screen is completely blue and a no signal message appears.
Blue
Startup
Screen This sets whether a starting-up screen (YAMAHA logo) is used or not. On
Hide Screen Sets the screen status when the [HIDE] button on the remote control is
pressed. The screen status can be selected from either “Blue” or “Black”. Black
Main menu Sub-menu Function
Default
setting
+,- :Select :Enter
Keystone
Off Black
Off On
Blue
Black
English
Blue
Off 30min. 60min.
No Signal
Startup Screen
Hide Screen
Auto Power Off
Trigger Out
Language
Reset All
0
Installation
External Auto
Image Info Setup Signal
Image menu Setup menu
Signal menu Info menu