Remote control – Yamaha DSP-AX863SE User Manual

Page 103

Advertising
background image

101

En

Troubleshooting

AD

DITIONAL

INFO

RM

A

T

ION

English

Remote control

Problem

Cause

Remedy

See

page

The remote control
does not work or
function properly.

Wrong distance or angle.

The remote control will function within a maximum
range of 6 m and no more than 30 degrees off-axis
from the front panel.

30

Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.

Reposition this unit.

The batteries are weak.

Replace all batteries.

4

The operation mode selector is set
incorrectly.

Set the operation mode selector correctly.
When operating this unit, set it to the FAMP
position. When operating the component selected by
the input selector button, set it to the FSOURCE
position. When operating the TV set in the
5DTV/CBL or 5PHONO area, set it to the FTV
position.

The remote control code was not correctly
set.

Set the remote control code correctly using
“List of remote control codes” at the end of this
manual.

85

Try setting another code of the same manufacturer
using “List of remote control codes” at the end of this
manual.

85

The library code of the remote control and
the remote control ID of this unit do not
match.

Match the remote control ID of this unit with the
corresponding remote control library code.

96

Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.

Program the necessary functions independently into
the programmable buttons using the Learn feature.

87

The remote control
does not learn new
functions.

The batteries of this remote control and/or
the other remote control are too weak.

Replace the batteries.

4

The distance between the two remote
controls is too much or too little.

Place the remote controls at the proper distance.

87

The signal coding or modulation of the
other remote control is not compatible
with this remote control.

Learning is not possible.

Memory capacity is full.

Delete other unnecessary functions to make room for
the new functions.

93

Advertising