Yamaha DSP-AX863SE - Manual (Page 67)

65
En
Customizing this unit (MANUAL SETUP)
AD
V
ANCED
OPERA
T
ION
English
Input menu 4 INPUT MENU
Some parameters described below may not be available for all input sources and some parameters are only available for specific input
sources.
Option menu 5 OPTION MENU
Note
Parameter Functions Page
I/O ASSIGNMENT Assigns the input/output jacks according to the component to be used if the initial settings of
this unit do not correspond to your needs. 76
INPUT RENAME Changes the name of the input source that appears in the OSD and in the front panel display. 77
VOL. TRIM Adjusts the level of the signal input at each jack. 77
DECODER MODE Switches the decoder activation mode. You can designate the reassigned digital input jacks for
DTS signals. 77
STANDBY CHARGE Selects whether this unit charges the battery of the stationed iPod or not when this unit is in the
standby mode (see page 28). 77
START PAIRING Pair the connected Yamaha Bluetooth adapter (such as YBA-10, sold separately) with a
Bluetooth component (see page 54). 78
BGV Selects the video source played back in the background of the sources input at the MULTI CH
INPUT jacks. 78
INPUT CH Selects the number of channels input from an external decoder. 78
FRONT Selects the analog jacks at which the front channel signals from an external decoder are input
when you set “INPUT CH” to “8CH”. 78
Menu Parameter Functions Page
A)DISPLAY SET DIMMER Adjusts the brightness of the front panel display. 79
OSD SHIFT Adjusts the vertical position of the OSD. 79
OSD-SOURCE Sets the amount of time to display the iPod menu in the video monitor
after you perform a certain operation. 79
OSD-AMP Sets the amount of time to display the status information screen after
you perform a certain operation. 79
FL SCROLL Selects the mode to display the information of the iPod in the front
panel display. 79
B)VIDEO SET VIDEO CONV. Selects whether to convert the video signals input at the VIDEO,
S VIDEO, and COMPONENT VIDEO jacks. 79
HDMI RES. Selects whether this unit activates the HDMI up-conversion of the
analog video signals input at the VIDEO, S VIDEO, and
COMPONENT VIDEO jacks so that the up-scaled video signals are
output at the HDMI OUT jack. 80
HDMI ASPECT Adjusts the aspect ratio for analog video signals output at the HDMI
OUT jack. 80
C)MEMORY GUARD — Prevents accidental changes to sound field program parameter values
and other system settings. 81