Yamaha DSP-AX863SE - Manual (Page 91)

89
En
Remote control features
AD
V
ANCED
OPERA
T
ION
English
3
Press 9k / n to select and enter a character.
Pressing 9n changes the character as follows:
A to Z, 1 to 9, 0, + (plus), – (hyphen), ; (semicolon),
/ (slash), and space.
Pressing 9k changes the characters in reverse order.
4
Press 9h to move the cursor to the next
position.
y
Press 9l to move the cursor to the previous position.
5
Press 9
ENTER to set the new name.
“OK” appears in the display window (6) on the
remote control if renaming was successful.
“NG” appears in the display window (6) on the
remote control if renaming was unsuccessful. In this
case, start over from step 3.
y
If you continuously want to rename another control area,
press the input selector button (5), or press
6SELECT k / n repeatedly to select the component, then
repeat steps 3 through 5.
6
Press C
RENAME again to exit the renaming
mode.
“ERROR” appears in the display window (6) on the remote
control if you press a button not indicated in the respective step,
or when you press more than one button simultaneously.
The macro programming feature makes it possible to
perform a series of operations with the press of a single
button. For example, when you want to play a CD,
normally you would turn on the components, select the
CD input, and press the play button to start playback. The
macro programming feature lets you perform all of these
operations simply by pressing the CD macro button. The
buttons listed as macro buttons below are factory set with
macro programs. You can also program your own macros
(see page 91).
■ MACRO operations
1
Set the C
MACRO ON/OFF selector to ON.
2
Press the desired macro button.
3
Set the C
MACRO ON/OFF selector to OFF
when you finish to using the macro
programming operation.
• While the remote control is running a macro program, it does
not accept any other operation until it has completed running
the program (the transmission indicator stops flashing).
• Continue to aim the remote control at the component the macro
is operating until the macro operation is complete.
Note
ENTER
A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E
PRESET/CH
RENAME
Macro programming features
Notes
V-AUX/DOCK
AV TV
1 2 3 4
DVD VCR DVR PHONO
DTV/CBL CD MD/CD-R
TUNER
POWER POWER
SCENE
POWER STANDBY
C B A
ON OFF CLEAR LEARN RENAME MACRO
REC
INFO EON MODE- PTY SEEK- START
Macro buttons
MACRO ON/OFF MACRO
ON OFF CLEAR LEARN MACRO
ON OFF CLEAR LEARN MACRO