Yamaha DSP-AX863SE - Manual (Page 89)

87
En
Remote control features
AD
V
ANCED
OPERA
T
ION
English
You can program remote control codes from other remote
controls. Use the learn feature if you want to program
functions not included in the basic operations covered by
the remote control codes, or an appropriate remote control
code is not available. You can program the function of
other remote control to the buttons in the highlighted areas
in the following illustration. The buttons can be
programmed independently for each control area.
The remote control transmits infrared rays. If the other remote
control also uses infrared rays, this remote control can learn most
of its functions. However, you may not be able to program some
special signals or extremely long transmissions. Refer to the
operating instructions for the other remote control.
1
Set the operation mode selector to
F
SOURCE and then press an input selector
button (5) to select a an control area.
Make sure that the operation mode selector is set to
FSOURCE. When you set the operation mode selector to
FAMP and program a remote control codes from other
remote controls, the programmed key cannot operate the
amplifier function of this unit.
2
Place this remote control about 5 to 10 cm
(2 to 4 in) apart from the other remote control
on a flat surface so that their infrared
transmitters are aimed at each other.
3
Press C
LEARN using a ballpoint pen or
similar object.
“LEARN” and the name of the selected control area
(e.g. “DVD”) appear alternately in the display
window (6) on the remote control.
• Do not press and hold CLEARN. If you hold it down for
more than 3 seconds, the remote enters the remote control
code setting mode.
• If you do not complete each of the following steps within
30 seconds, the learning mode will be automatically
canceled. In this case, start over from step 3.
4
Press the button for which you want to
program the new function.
“LEARN” appears in the display window (6) on the
remote control.
Programming codes from other
remote controls
Note
Note
V-AUX/DOCK
–
+ +
– –
+
TV MUTE TV INPUT MUTE
AV TV
1 2 3 4
VOLUME
TV
SOURCE
AMP
SELECT
DVD VCR DVR PHONO
DTV/CBL CD MD/CD-R
TUNER
POWER POWER
SCENE
POWER STANDBY
TV VOL TV CH
C B A
ENTER
DISPLAY
AUDIO MENU TITLE
4 3 2
ENT + 10 0 9
5
1
7 6 8
RETURN
ON OFF CLEAR LEARN RENAME MACRO
REC
INFO EON MODE- PTY SEEK- START
STRAIGHT
PURE DIRECT
A/B/C/D/E
PRESET/CH SET MENU
SRCH MODE
LEVEL
SLEEP
STEREO
MULTI CH IN
SUR. DECODE PARAMETER
CLASSICAL LIVE/CLUB ENTERTAIN
ENHANCER
MOVIE
BAND
MEMORY
Notes
V -A
U X/DOCK
AV
TV 12
3
4
SELECT
DV
D
VCR
DV
R
PHONO
DTV/CBL
CD
MD/CD-R
TUNER PO
WER
PO
WER
SCENE
PO
WER
ST
ANDBY
C
B
A
5 to 10 cm
Other remote control
LEARN