Zephyr CPA-E48ASX - Manual (Page 18)

18
13. Optional duct cover installation:
a. Remove the support bracket from the Duct Cover
assembly and attach it to the ceiling with 2 drywall
anchors and screws
Note: The printed index on the bracket must match
the center line previously drawn (See installation
step
2).
Conduit
Duct
Position
reference
Position
reference
CenterLine
Duct cover
support barcket
Inst
allation - Inst
alling the Duct Covers
Unscrew the 4 screws that fix the section of the Duct
Cover (Starting collar) and release all parts.
Install the upper section to the support bracket with
2 screws.
Note: Check that joined seam is positioned towards
the back.
Note2: The lower section (Collar) of the duct cover
assembly must be installed at the end of the
installation with 2 screws.
Support
Bracket
Upper
section
Lower
section
(Collar)