Zephyr CPA-E48ASX - Manual (Page 24)

24
Maintenance
BAFFLE FILTER
This must be cleaned once a month using non abrasi-
ve detergents, either by hand or in the dish-washer,
which must be set to a low temperature and a short
cycle.
When washed in a dish-washer, the baffle filter may
discolor slightly, but this does not affect its filtering
capacity.
To remove the baffle filter, pull (a) the handle and extract
the filters (b)
.
REPLACING THE HALOGEN LIGHT BULB:
WARNING
Disconnect the hood from electricity and be sure the
lights are cool.
If new lights do not operate, make sure the light bulb is
inserted correctly before calling service.
• Remove bulb by pressing both ends of the metal
retaining clip together, the light socket will now
protude from the hood
allowing you to remove the
bulb.
(Be careful when releasing retain clip as it is under
pressure to hold it in place)
• Replacement halogen bulbs are available at most
stores which sell light bulbs. Purchase type GU-10,
120V, 50W. Follow package directions.
• Reinstall the metal retaining.
ATTENTION!
Prior to any maintenance operation ensure that the cooker hood is disconnected from the power supply.
CLEANING
The cooker hood should be cleaned regularly internally and externally.
Use a cloth moistened with a neutral liquid detergents. Avoid abrasive detergents.
Warning:
Failure to carry out the basic cleaning recommendations of the cooker hood and replacement of the filters may cause fire
risks.
Therefore, we recommend oserving these instructions.
a
a
b
b
metal
retaining