Yamaha RX-V861 - Manual (Page 108)

RESETTING THE SYSTEM
104
En
Use this feature to reset all the parameters of this unit to the initial factory settings.
• This procedure completely resets all the parameters of this unit including the “SET MENU” parameters. However, the advanced setup
menu parameters will not be initialized.
• The initial factory settings are activated next time you turn on this unit.
y
To cancel the initialization procedure at any time without making any changes, press BMASTER ON/OFF on the front panel to
release it outward to the OFF position.
1
Press B
MASTER ON/OFF on the front
panel to release it outward to the OFF
position to turn off this unit.
2
Press and hold C
TONE CONTROL and
then press B
MASTER ON/OFF inward to
the ON position to turn on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
3
Rotate the D
PROGRAM selector to select
“PRESET”.
4
Press C
TONE CONTROL repeatedly to
select “RESET”.
y
Select “CANCEL” to cancel the initialization procedure
without making any changes.
5
Press B
MASTER ON/OFF to release it
outward to the OFF position to confirm your
selection and turn off this unit.
Resetting the system
Notes
TONE CONTROL MASTER
ON OFF
While holding
down