Yamaha RX-V861 - Manual (Page 65)

ADVANCED SOUND CONFIGURATIONS
61
En
AD
V
ANCED
OPERA
T
ION
English
You can enjoy good quality sound with the initial factory
settings. Although you do not have to change the initial
factory settings, you can change some of the parameters to
better suit the input source or your listening room.
You cannot change the sound field parameter values when
“MEMORY GUARD” in “OPTION MENU” is set to “ON” (see
page 83). If you want to change the sound field parameter values,
set “MEMORY GUARD” to “OFF”.
1
Turn on the video monitor connected to this
unit.
2
Set the operation mode selector to K
AMP
and then press O
DISPLAY on the remote
control.
The following status screen appears in the OSD.
3
Press one of the sound field program
selector buttons (P) repeatedly to select the
desired sound field program you want to
adjust.
4
Press Dk / n to select the desired sound
field parameter and then Dl / h to change
the selected sound field parameter value.
y
• For details about the function and control range of each
sound field parameter, see page 63.
• When you set a sound field parameter to a value other than
the initial factory settings, an asterisk mark (*) appears by
the sound field parameter name in the OSD.
• The available sound field parameters for some of the
sound field programs may be displayed on more than one
page in the OSD. In this case, press Dk / n to scroll
through pages.
• If you press and hold Dl / h to change the sound field
parameter value, the initial factory settings are shown
momentarily in the front panel display.
• Use the “PARAM. INI” feature in “OPTION MENU” to
initialize the parameters of each sound field program
within a sound field program group (see page 83).
• You can select the amount of time that the current status is
displayed in the OSD by using the “OSD-AMP” parameter
in “OPTION MENU” (see page 82).
5
Press O
DISPLAY to turn off the sound field
parameter display.
Advanced sound configurations
Changing sound field parameter
settings
Note
NIGHT: OFF
A.SEL: HDMI
INPUT: DVD
Sci-Fi
MOVIE
STATUS VOL:-40.0dB
PARAMETER
MOVIE
. Sci-Fi 1/2
PRO LOGIC
DSP LEVEL ;;;;0dB
P.INIT.DLY ;;16ms
P.ROOM.SIZE ;;1.0
S.INIT.DLY ;;20ms
[RETURN]:STATUS
Cursor